| |
Quantum3D Mercury AAlchemy Heavy Metal Advanced Graphics Subsystem. Obsidian 2 Quad PCI 3DFX card set in a Heavy Metal Chassis This is a Quantum3D AAlchemy Heavy Metal Advanced Graphics Subsystem, or at least part of one. It doesn't seem complete, no HDD, software, manuals or top cover are here because I don't have them. This is an Obsidian2 card set in a Heavy Metal chassis. Hg Mercury, Quantum 3D RealTime 3D graphics sub-system. Fancy. The Obsidian2 set with mercury Riser Cards and a AAlchemy card on the top connecting them all together. Four cards plus the four risers plus the AAlchemy module on the top. I plugged a monitor into the vga connection on the mothrboard. I got this splash screen, then this bios screen. So here is the POST test and the processors. There are two slot-1 processors. One stick of RAM and room for three more. But this tries to boot up. It has no hard disk so it complains it's OS is not found. But it seems functional as far as I am able to test it. I don't have any monitor that will plug into the Obsidian2 cards. There are DB15 connections, a round yellow maybe composite video connection and maybe an S-Video on each one. But I have no cabling, harnesses, software or other items to go with this. There is no HDD installed. The back, numerous plugs, power supply, etc. Inside the front cover are several switches, a removable HDD sled at the bottom, that is locked and I don't have the key. Above that a CDROM drive, and a FDD at the top. Those are filters on the left. The front, viewed from the top. Some cables, numeous fans.
This is a set of four Quantum3D Obsidian2 cards with mercury Riser Cards and a AAlchemy card on the top connecting them all together. Four cards plus the four risers plus the AAlchemy module on the top. Four PCI cards all connected together. Gee whiz. Each of these cards has 24 Magic Silicon 125 Mhz chips, 12 on each side.
That all said I don't know what this kind of graphics workstation would be used for. Pretty fancy, though. There are drivers on this German site HERE. I am no expert so I can't say if the drivers are the exact ones needed, you have to know that. I can't answer any questions about this. The chassis has some rack slides on the side but the other half is missing, the part that screws into the rack. Lots missing here. I wish I had the top cover, but I don't. The drive caddy has some wires hanging out in there. Dunno what's up with that.
以上资料来源以下地址: http://cgi.ebay.com/Quantum3D-Mercury-AAlchemy-Obsidian2-w-Heavy-Metal-/190492020884?pt=PCC_Video_TV_Cards&hash=item2c5a359094 |
Powered by Discuz! X1
© 2001-2010 Comsenz Inc.